Updated on 19 October, 2021
A qualified Chloride Tester (or Chloride detector) is very important in industrial processes. This is because it not only ensures that there is no excessive level of chlorate in the environment but also that there are no leaks. Chloride testers use a combination of methods, such as gas chromatography and ion chromatography to test for the presence of hazardous substances such as volatile organic compounds, VOCs and carcinogens. The use of a Chloride Tester is essential when dealing with hazardous materials, particularly in the industrial and manufacturing sectors.
A chlorinate-checker, which is also referred to as a "Chlorine Tester" is a type of mobile or stand by device that is designed to check the purity of a concrete mixture. It consists of a column and a storage tank. The column is placed on the floor near the area where the concrete mixture is prepared for installation. The tank is then placed above the storage chamber. The storage chamber is then connected to a tester, which is attached to the column and a positive pressure is applied to the reader of the Chloride Tester.
A typical Chloride Tester contains two electrodes, one being an ion selective electrode and the other, a borate-based ion selective electrode. When a current is run through the system, ions of chlorine are detected. The chloride present in the sample gives off a gas called volatile organic compound (VOC), which can be detected using a special Chloride Oximeter. Another type of Chloride Tester is a combination of an ion selective electrode and a borate-based electrode. The difference between the two types of Chloride Tester is that the ion selective electrode does not eliminate VOC completely but only stops it from escaping into the atmosphere.
A third type of Chloride Tester is a combination of two different gases. One such gas is methylene chloride, and the other is ethylene tetrahydrate (ETH). These two ingredients react when they come in contact with water. The results of the testing machine can be seen on a monitor screen, and data can be recorded to show the concentration of volatile organic compounds or to show the results of the tester.
The use of a Chloride Tester in the concrete mixture industry is a way of testing for compliance with OSHA safety standards. The tester measures the percentage of volatile organic compounds, also called VOCs, in the concrete mixture. An example of such a substance could be construction debris or oil. If the levels found in the concrete mixture are considered to be excessive, this could result in the need for an alteration in the concrete recipe or new concrete being poured.
Another use for a Chloride Tester is in the area of controlling temperature. Certain mixtures, such as those containing PVC, may experience higher temperatures than others. The Chloride Tester will be used to identify the reason for this variation in temperature and then changes the temperature so that it is in compliance with the standard. For instance, if one part of the material is found to be two degrees Celsius (around 300 Fahrenheit) above the accepted range, then the material will be changed to a material with a lower melting point.
A fourth possible use is in the area of stainless steel inner tank testing. Most stainless steel tanks will experience scale buildup after a period of time. When this occurs, it will affect the performance and efficiency of the tank. To determine what is causing the scale build up, a Chloride Tester is used. Through the results of this test, the stainless steel manufacturing company will be able to identify areas of improvement and make necessary adjustments.
In conclusion, the Chloride Tester is used for a number of different testing situations. From checking the range of temperatures for various materials to determining the hardness of a material and more, the various types of testers can help to make certain that the products that are produced are at their best and performance potential. Whether you are buying a product online or in a brick and mortar store, you should always take a moment to consider the possibilities that a Chloride Tester has to offer. Not only can this type of testing save you money, but it can help to ensure that your products remain at the peak of their ability to perform.